File view

menus.txt

      
            **************************************************************************
          
            **								      	**
          
            **  		     Keypad and Setup Menu structure			**
          
            **									**
          
            **************************************************************************
          
            ** SETUP PB **
          
            " RUN TIME SETUP "	// ENTER PB moves to first product
          
            "                "	// SETUP PB moves to disable setup
          
            	"REPRES TIME MIN "	// UP/DOWN PB toggles product num
          
            	"PRODUCT X   00.0"	// ENTER PB moves to delay time
          
            	"DELAY TIME MIN  "	// UP/DOWN PB toggles product num
          
            	"PRODUCT X   00.0"	// ENTER PB moves to run time next product
          
            "   REPRESSURE   "	// ENTER PB moves to first product
          
            "  DISABLE TIME  "	// SETUP PB moves to full shutdown		
          
            	"DIS START TIME  "	// UP/DOWN PB toggles product num
          
            	"PRODUCT X     00"	// ENTER PB moves to end time
          
            	"DIS END TIME    "	// UP/DOWN PB toggles product num
          
            	"PRODUCT X     00"	// ENTER PB moves to start time next product
          
            "SUMP ALM SHUTDWN"	// SETUP PB moves to set date
          
            "  PER PRODUCT   "	// UP/DOWN PB toggle "per product" / "per channel"
          
            " SET DATE/TIME? "	// ENTER PB moves to year
          
            			// SETUP PB moves to site config
          
            	"    Set Date    "	// SETUP PB moves to site config		
          
            	"   Year = 0000  "	// ENTER PB moves to month
          
            	"   Month = 00   "	// ENTER PB moves to day
          
            	"    Day =  00   "	// ENTER PB moves to time set hour
          
            	"    Set Time    "	// SETUP PB moves to site config
          
            	"    Hour = 00   "	// ENTER PB moves to minute
          
            	"   Minute = 00  "	// ENTER PB moves to site config
          
            "     SITE       "	// ENTER PB moves to passcode
          
            " CONFIGURATION  "	// SETUP PB moves to network config
          
            	"    PASSCODE    "	// ENTER PB confirms code moves number of turbines
          
            	"      0000      "	// 
          
            	"NUM OF TURBINES "	// UP/DOWN PB toggles product num	
          
            	"PRODUCT X      0"	// ENTER PB moves to lead turbines
          
            	"NUM OF LEAD TURB"	// UP/DOWN PB toggles product num
          
            	"PRODUCT X      0"	// ENTER PB moves to run turbines
          
            	"NUM OF RUN TURB "	// UP/DOWN PB toggles product num
          
            	"PRODUCT X      0"	// ENTER PB moves to rotate turbines
          
            	"ROTATE TURBINES "	// UP/DOWN PB toggles yes / no
          
            	"PRODUCT X    YES"	// ENTER PB moves to cascade
          
            	"AUTO CASCADE?   "	// UP/DOWN PB toggles yes / no
          
            	"PRODUCT X    YES"	// ENTER PB moves to num turbines for next product
          
            "     NETWORK    "	// ENTER PB moves to DHCP/Static
          
            "  CONFIGURATION "	// SETUP PB moves to software update
          
            	" TCP/IP ADDRESS "	// UP/DOWN PB toggles DHCP / STATIC
          
            	"      DHCP      "	// ENTER PB moves to ip if static or reload if DHCP
          
            	"   IP ADDRESS   "	// ENTER PB moves to subnet
          
            	"   Subnet Mask  "	// ENTER PB moves to gateway
          
            	"     GATEWAY    "	// ENTER PB moves to dns
          
            	"   DNS SERVER   "	// ENTER PB moves to reload
          
            	"000.000.000.000 "	// SETUP PB moves to reload
          
            	" RELOAD NETWORK "	// ENTER PB will reload network interface
          
            	"   INTERFACE?   "	// Setup PB will move to software update
          
            "     UPDATE     "		// Enter PB will look for software update
          
            "    SOFTWARE?   "		// Setup PB will exit menu
          
            ** CLEAR PB **
          
            Exits a menu without changing values
          
            ** RESER PB **
          
            "RESET CHANNEL ? "	// Channel # and ENTER PB runs the ISM reset function
          
            "      0         "
          
            ** OVERRIDE PB **
          
            "OVERRIDE  TOGGLE"	// Channel # and ENTER PB turns on channel ouput no matter what
          
            "      0         "
          
            ** View PB **
          
            " VIEW  CHANNEL? "	// Channel # and ENTER PB freezes display on channel
          
            "      0         "
          
            ** Test PB **
          
            " TEST  CHANNEL? "	// Channel # and ENTER PB puts channel into test mode
          
            "      0         "
          
            ** CMD PB **
          
            "  COMMAND CODE  "	// Typical 2 digit cmd code followed by channel #
          
            "      000       "
          
            CMD 11#	- Declares a channel dead and moves to free channel
          
            CMD 12# - Put channel into test
          
            CMD 130 - Display status of Auth and pressure inputs
          
            CMD 140 - Display network status

1	**************************************************************************
2
3	Keypad and Setup Menu structure
4
5	**************************************************************************
6
7
8	SETUP PB
9
10	" RUN TIME SETUP " // ENTER PB moves to first product
11	" " // SETUP PB moves to disable setup
12
13	"REPRES TIME MIN " // UP/DOWN PB toggles product num
14	"PRODUCT X 00.0" // ENTER PB moves to delay time
15
16	"DELAY TIME MIN " // UP/DOWN PB toggles product num
17	"PRODUCT X 00.0" // ENTER PB moves to run time next product
18
19	" REPRESSURE " // ENTER PB moves to first product
20	" DISABLE TIME " // SETUP PB moves to full shutdown
21
22	"DIS START TIME " // UP/DOWN PB toggles product num
23	"PRODUCT X 00" // ENTER PB moves to end time
24
25	"DIS END TIME " // UP/DOWN PB toggles product num
26	"PRODUCT X 00" // ENTER PB moves to start time next product
27
28	"SUMP ALM SHUTDWN" // SETUP PB moves to set date
29	" PER PRODUCT " // UP/DOWN PB toggle "per product" / "per channel"
30
31
32	" SET DATE/TIME? " // ENTER PB moves to year
33	// SETUP PB moves to site config
34
35	" Set Date " // SETUP PB moves to site config
36	" Year = 0000 " // ENTER PB moves to month
37	" Month = 00 " // ENTER PB moves to day
38	" Day = 00 " // ENTER PB moves to time set hour
39
40	" Set Time " // SETUP PB moves to site config
41	" Hour = 00 " // ENTER PB moves to minute
42	" Minute = 00 " // ENTER PB moves to site config
43
44	" SITE " // ENTER PB moves to passcode
45	" CONFIGURATION " // SETUP PB moves to network config
46
47	" PASSCODE " // ENTER PB confirms code moves number of turbines
48	" 0000 " //
49
50	"NUM OF TURBINES " // UP/DOWN PB toggles product num
51	"PRODUCT X 0" // ENTER PB moves to lead turbines
52
53	"NUM OF LEAD TURB" // UP/DOWN PB toggles product num
54	"PRODUCT X 0" // ENTER PB moves to run turbines
55
56	"NUM OF RUN TURB " // UP/DOWN PB toggles product num
57	"PRODUCT X 0" // ENTER PB moves to rotate turbines
58
59	"ROTATE TURBINES " // UP/DOWN PB toggles yes / no
60	"PRODUCT X YES" // ENTER PB moves to cascade
61
62	"AUTO CASCADE? " // UP/DOWN PB toggles yes / no
63	"PRODUCT X YES" // ENTER PB moves to num turbines for next product
64
65	" NETWORK " // ENTER PB moves to DHCP/Static
66	" CONFIGURATION " // SETUP PB moves to software update
67
68	" TCP/IP ADDRESS " // UP/DOWN PB toggles DHCP / STATIC
69	" DHCP " // ENTER PB moves to ip if static or reload if DHCP
70
71	" IP ADDRESS " // ENTER PB moves to subnet
72	" Subnet Mask " // ENTER PB moves to gateway
73	" GATEWAY " // ENTER PB moves to dns
74	" DNS SERVER " // ENTER PB moves to reload
75	"000.000.000.000 " // SETUP PB moves to reload
76
77	" RELOAD NETWORK " // ENTER PB will reload network interface
78	" INTERFACE? " // Setup PB will move to software update
79
80	" UPDATE " // Enter PB will look for software update
81	" SOFTWARE? " // Setup PB will exit menu
82
83
84
85	CLEAR PB
86
87	Exits a menu without changing values
88
89
90	RESER PB
91
92	"RESET CHANNEL ? " // Channel # and ENTER PB runs the ISM reset function
93	" 0 "
94
95
96	OVERRIDE PB
97
98	"OVERRIDE TOGGLE" // Channel # and ENTER PB turns on channel ouput no matter what
99	" 0 "
100
101
102	View PB
103
104	" VIEW CHANNEL? " // Channel # and ENTER PB freezes display on channel
105	" 0 "
106
107
108	Test PB
109
110	" TEST CHANNEL? " // Channel # and ENTER PB puts channel into test mode
111	" 0 "
112
113
114	CMD PB
115
116	" COMMAND CODE " // Typical 2 digit cmd code followed by channel #
117	" 000 "
118
119	CMD 11# - Declares a channel dead and moves to free channel
120	CMD 12# - Put channel into test
121	CMD 130 - Display status of Auth and pressure inputs
122	CMD 140 - Display network status
123
124
125
126
127